KARBON BLACK

SYNTHETIC GRAPHITE

VERMICULITE
CASHEW FRICTION
DUST (BLACK)

CASHEW FRICTION
DUST (BROWN)

ROCK WOOL
LOOSE WOOL) KAYA YÜNÜ

FLAKE GRAPHITE ( DOĞAL GRAFİT )
PETROLEUM COKE

PHENOLIC RESIN

CHOPPED STEEL FIBRE (WOOL) – (ÇELİK FİBER)

ANTIMONY TRISULPHIDE

METALİK SHIM (ses kesici)
YEL DOLGU (FİLLİTE)

KAMPANA BALATA AKSESUARLARI

BALATA AKSESUARLARI

DİSK BALATA AKSESUARLARI

WEAR SENSOR

DİSK BALATA SACI

DİSK AYNASI
         
 

METALİK SHIM (ses kesici) yapışkanlı

       
    Specification  

Damping System Construction
Caliper Side

qqqqqq

BackPlate Side

(Plus Protective Film)

  Rubber Coating 0.057 mm (0.0023 in.)
  Cold Rolled Steel 0.400 mm (0.0157 in.)
  Rubber Coating 0.057 mm (0.0023 in.) PSI-63
  Viscoelastic 0.120 mm (0.0047 in.)
  Nominal 0.634 mm (0.0250 in.)
 Minimum - 0.581 mm (0.0228 in.)
Maximum - 0.687 mm {0.0271 in.)
 

Attachment ParameterS (These are recommendations only and may vary depending on the process)


  1. Bonding Part Pressure: 400 psi (28 bar)
  2. Out of the Press Insulator Bond Line Temperature: 20 °C
    (68 °F)
  3. Bonding Time: 10 seconds
  4. A DOE must be completed on production eguipment to
    optimize the bonding pressure, time and temperature.
    TRM is available to help.

  1. Mechanical fastening is recommended.
  2. Use of compliant layer during bonding process is
    recommended.

» Remove protective film from the adhesive prior to bonding onto the backplate.

D428

SHIM PLATES CATALOGUE

D52

D54

D56

D57

D58

D61

D71

D76

D77

D81

D82

D84

D86

D92

D94

D97

D98

D99

D100

D101

D103

D104

D106

D109

D112

D113

D114

D115

D117

D118

D120

D123

D124

D130

D131

D132

D134

D135

D136

D137

D141

D142

D143

D144

D145

D146

D147

D148

D149

D150

D153

D154

D156

D157

D158

D159

D160

D161

D162

D163

D165

D169

D170

D172

D173

D175

D176

D177

D178

D179

D183

D185

D188

D191

D194

D195

D199

D200

D202

D214

D215

D216

D217

D219

D210

D221

D222

D226

D227

D228

D229

D230

D237

D240

D242

D245

D248

D251

D252

D253

D255

D256

D257

D258

D260

D261

D262

D263

D264

D266

D272

D273

D274

D275

D276

D277

D278

D279

D281

D2282

D285

D289

D290

D291

D293

D294

D295

D296

D298

D300

D301

D302

D306

D308

D309

D310

D311

D313

D314

D315

D316

D317

D318

D319

D320

D321

D322

D323

D324

D325

D326

D331

D333

D334

D338

D340

D341

D342

D344

D346

D347

D348

D349

D352

D353

D354

D355

D356

D357

D358

D359

D361

D362

D363

D364

D366

D367

D368

D369

D370

D373

D374

D376

D377

D378

D381

D382

D383

D385

D387

D388

D389

D390

D391

D392

D394

D395

D396

D397

D398

D399

D401

D402

D403

D405

D406

D407

D408

D409

D410

D411

D412

D413

D414

D415

D417

D418

D419

D420

D421

D422

D423

D429

D430

D431

D435

D436

D437

D439

D440

D441

D443

D444

D445

D448

D449

D451

D452

D455

D456

D459

D460

D461

D462

D464

D465

D466

D440

D441

D443

D444

D473

D474

D475

D477

D478

D479

D480

D481

D484

D485

D487

D490

D492

D493

D496

D497

D498

D499

D500

D502

D503

D504

D505

D506

D507

D508

D509

D510

D512

D514

D515

D517

D522

D526

D529

D530

D530

D532

D534

D536

D537

D538

D539

D540

D542

D543

D544

D545

D547

D549

D552

D553

D554

D556

D557

D558

D559

D560

D562

D563

D564

D565

D566

D567

D568

D570

D571

D572

D574

D576

D580

D581

D583

D585

D586

D587

D588

D590

D591

D593

D595

 

 

 


NOT : YUKARIDA BELİRTİLEN SPESİFİKASYONLAR STANDART OLARAK BELIRTİLMİŞTİR. TALEBINIZE KARŞILIK FARKLI ÖZELLİKLERDE ÜRÜN TEDARİĞİ YAPILMAKTADIR.

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

The copying, use, distribution or disclosure of the confidential contents mentioned in this document(s) is strictly prohibited. Prior written authorisation is needed. Any breach shall subject the infringing party to remedies.  All rights are reserved in any case of grant of a patent or the registration of a utility model or design.

Bu belge içerisinde ki bilgileri kopyalama,kullanımı, dağıtımı veya gizli içeriğin bu belgelerdeki  açıklanması kesinlikle yasaktır. Önceden yazılı izni gereklidir. Herhangi bir ihlal durumunda konu yetkili mahkemelere taşınır. Patent veya faydalı model ve tasarımı izinsiz kullanılamaz.Her hakkı saklıdır.

Tunca Trade
1472 sokak no 24 kat 3 daire 5
Alsancak -Izmir
PK 35220 TURKEY
Fon:  90 232 464 23 02  
Fax:  90 232 464 19 27
www.tuncatrade.com
info@tuncatrade.com

     
html> html>